Holly berry hair bow free SVG

February 23, 2024

Holly berries are an essential part of every Christmas season celebration. This bow features holly berries and holly leaves together to make a festive bow. You can use it to make a hair bow or scale up the size and use it to decorate a Christmas wreath.

My post contains some affiliate links so if you make a purchase after clicking on a link I may receive a commission but it will not cost you anything. Read my disclosure here.

To get the free SVG file to make some fun earrings just use the newsletter sign up form below and the SVG cut file will be sent directly to your inbox. Find lots more free SVG’s here.

Materials list

The step by step tutorial

Step One

Download the free pattern here, and then upload it to Cricut design space. If you need help on how to upload SVG patterns to Design space than check out this tutorial. Below you will see the SVG cut file loaded to the canvas.

Once the design loads to Design space, you will see that pieces are different colors. This means that each color will cut out one at a time. If you want to make any changes select the layer and change the color to have it cut out at a different time. Alternately you can turn the layers on or off to print them one by one.

Once you are satisfied with how you want to cut the layers out press the green “Make” button.

Step Two

In the prepare window you will see that each color is displayed on a seperate mat. Take the time to arrange the pieces on the mat how you want them to be cut.

Step Three

Observe the area that the design will be cut and cut out each color in your vinyl a tiny bit bigger, so that it is ready to be put onto mats for cutting.

Step Four

Now place the vinyl, nice side facing down, onto your mat. I recommend using the purple sticky mat with faux leather. If you place contact paper onto your mat it will help keep your mat clean and last longer. Use painters tape to tape around the edges to help hold the fabric in place while cutting.

If you only have one mat than you will have to place and remove the vinyl after each cut. If you have more mats than go ahead and place the fabric on them to be prepared to be cut.

Step Five

Once you press the “Continue” button in the Prepare window it will bring you to the next screen which is the project window. Here I recommend selecting the “Faux leather” setting and you can choose which ever pressure you like. Follow the instructions on the screen to upload the fine-point blade and load your cutting mat into you machine.

When you mat is loaded go ahead and press the flashing “C” button on the machine and it will begin to cut your fabric.

Once it is done it will immediately move on to the next mat. So you can either load your mat that is already set up, or if you are working with one mat than remove the fabric and load the next color.

Now press the flashing “C” buttin to cut out the next mat. Now continue this process till all the shapes are cut out.

Step Six

Below you can see all the shapes cut out. Now you are ready to assemble your bow. So now get your glue gun plugged in and let’s get ready to assemble the bow.

Step Seven

Now it’s time to glue the individual pieces. First place a small amount of glue on the center of the gold bow and press one side over and hold till the glue dries. Now copy this on the other side to complete the bow part, and set aside for later.

Take the light green stem parts and put a tiny bit of hot glue along the back side. Now glue these onto the darker green leaves, and set aside.

Take the three little white circles and put a small amount of hot glue on the back and affix them to the larger red circles. I think it looks nice if the white is off to the side in stead of centered, but this is up to you.